Sailor 6120 mini-C SSA System - USA Version
SAILOR 6120 mini-C SSAS introduces new messaging functionality and meets all requirements of the Ship Security Alert System.
SAILOR® 6120 mini-C SSAS
The SAILOR 6120 mini-C SSAS builds on the successful legacy of the SAILOR TT-3000SSA System, which since its introduction in 2004 has proven its worth in real world incidents, time and time again.
Like its predecessor, the SAILOR 6120 mini-C SSAS is based around a, self-contained and sealed Inmarsat mini-C terminal, housing both antenna and transceiver. This design approach has proven to be rugged and reliable regardless of vessel type and with the terminal’s 50 channel GPS module and omni-directional antenna, satellite fix and position are ensured even under the most adverse conditions.
The SAILOR 6120 mini-C SSAS fully meets and exceeds the requirements listed in IMO MSC. 136(76) and MSC. 144(77) under SOLAS resolution XI-2/6. This stipulates that all vessels over 500 GT are required to be fitted with a Ship Security Alert System (SSAS) to be used under pirate attacks to notify the flag state administration. Alarms are silent, meaning that there is no audio or visual indication on the vessel that an alarm has been activated.
SAILOR 6120 mini-C SSAS Features
The multiple address functionality enables additional messages to be sent directly to, e.g. the vessel owner, operator or crew family, in addition to the required flag state and ship owner message in relation to the ISPS code. It is possible to have 6 seperate entries with up to 128 characters. Re-configuration can be done remotely or by a SAILOR technician, and has been made simpler, requiring no crew interaction. New configurations may be required when changing flag, where the SSAS alert address stored in the terminal needs to be updated.
The Thrane 6194 Terminal Control Unit (TCU), is the key connection point to the system and brings new functionality to ease operation. The TCU has a range of LEDs that allow operators to quickly determine Inmarsat, GPS and program status. They are all usefull features if the SAILOR 6120 mini-C SSAS is also used as Long Range Identification and Tracking (LRIT) carrier. The TCU allows for up to 6 SSAS buttons to be connected and monitored seperatly.
Easy Upgrade & Installation
Upgrading from a SAILOR TT-3000SSA has been made easy as existing SSAS alert and test buttons can be simply connected to the TCU instead of the legacy interconnection box. The SAILOR 6120 mini-C SSAS comes complete with all cables and connectors, making it ready to go out of the box. The standard connection cable to the mini-C terminal is 30M long, but can be extended up 200M.
Approvals and Certification
The SAILOR 6120 mini-C SSAS is approved by Inmarsat and all major classification societies and national flag state administrators where required. In addition to its primary function as SSA alert carrier the SAILOR 6120 mini-C SSAS cam also function as a LRIT.
ThraneLINK is a sophisticated communication protocol that connects the SAILOR products in a network, offering important new opportunities to vessels. It provides facility for remote diagnostics and enables access to all the SAILOR products from a single point for service. This results in optimized maintenance and lower cost of ownership because less time is needed for troubleshooting and service. Installation is made easier as ThraneLINK automatically identifies new products in the system. The uniform protocol is an open standard which provides a future proof solution for all vessels.
- Sealed terminal – rugged and reliable
- Single sealed unit for reliability and simple installation
- Multiple address functionality
- Determine system status using the new TCU
- Integrates with the innovative touchscreen SAILOR 6006 Message Terminal
Absolute power supply range
10.5 - 32 VDC
Nominal power input
Power consumption (typical)
Rx: 1.85 W @ 15 VDC
Tx: 22 W @ 15 VDC
Terminal Unit Specifications
Rx Frequency Band: Rx: 1525 - 1545 MHz
Tx Frequency Band: Tx: 1626.5 - 1646.5 MHz
NMEA 2000 DeviceNet Mini-style, Male
Terminal Control Unit Interfaces
CAN interface NMEA2k mini, RS-232, LAN interface RJ45
Ship Security Alert Specifications
2 x SSAS alert buttons with 50 m cable
1 x Test button wirh 50 m cable
Up to 6 alert buttons can be connected and 1 test button
Antenna Unit Specifications
-23.7 dBk at 5° elevation
Min. 7 dBW at 5° elevation
-15° to 90°
mini-C Terminal Dimensions Without Pole Mount (H x Dia.)
170.5 mm x 145 mm / 6.71 in x 5.71 in
mini C Terminal Weight
1.1 kg / 2.42 lbs
Terminal Control Unit Dimensions (L x W x H)
239 mm x 172 mm x 54 mm / 9.41 in x 6.77 in x 2.13 in
Terminal Control Unit Weight
0.8 kg / 1.76 lbs
SAILOR 6110, 6120
SAILOR 6110, 6120, 6130
SAILOR 6110, 6130, 6140, 6150
SAILOR 6110, 6120, 6130, 6140, 6150
Meets Inmarsat maritime specifications and SOLAS Resolution XI-2/6
Inmarsat Type Approval
|Package Includes||- SAILOR 3027 SSA Terminal
- SAILOR 6194 Terminal Control Unit
- 30M NMEA2K Mini Device Cable
- Mini/Micro NMEA2K Tee
- 6m NMEA2K Power Cable
- US SSAS button kit
- User/installation guide